The Beginners Guide to Initialising CEGUI

Table of Contents

• Introduction
• The Easy Way: Renderer 'bootstrapSystem' functions
  • OpenGL (Fixed Function)
  • OpenGL 3
  • Direct3D
  • Ogre3D
  • Irrlicht
• The Hard Way: Manual object creation.
  • Create an instance of a CEGUI::Renderer based object
    • Direct3D 9
    • Direct3D 10
    • OpenGL (Fixed Function)
    • OpenGL 3
    • Ogre3D
    • Irrlicht Engine
  • Create the CEGUI::System object to initialise the system
• Call the function to render the GUI
  • Direct3D 9
  • Direct3D 10
  • OpenGL
  • Irrlicht
• Conclusion

Author

Paul D Turner

Introduction

In order to get CEGUI initialised and rendering – regardless of your target API or engine – there are basically three steps that need to be performed:

• Create an instance of a CEGUI::Renderer based object.
• Create the CEGUI::System object (passing in the renderer created above).
• Each frame, call the CEGUI::System::renderAllGUIContexts function to perform the rendering.

Obviously you also need to load some data and perform other basic initialisation, which is covered in The Beginners Guide to resource loading with ResourceProviders and The Beginners Guide to Data Files and Defaults Initialisation. You'll also need to get your inputs into the system so that you can interact with the GUI elements, this is covered in The Beginners Guide to Injecting Inputs.

The Easy Way: Renderer 'bootstrapSystem' functions

This section describes the quickest and easiest way to get CEGUI up and running, and that is to use the static 'bootstrap' helper functions that are available on the Renderer class for your chosen API or engine. Unless you're doing something advanced or otherwise unusual, these are the fuctions you'll want to use, since they enable the creation of all the initial CEGUI objects in a single call.

Note that the Renderers also have destroySystem functions for cleaning up afterwards.

The Ogre3D and Irrlicht engines each have their own intergrated file loading and image parsing functionality which CEGUI can seamlessly make use of via custom implementations of the CEGUI::ResourceProvider and CEGUI::ImageCodec interfaces. In order to make use of these implementations, the user would typically be required to create instances of these objects and pass them, along with the CEGUI::Renderer, to the System::create function. Since this over-complicates system construction for the majority of cases, the bootstrapSystem functions for those Renderers will create all the engine specific supporting objects automatically.

As stated above, when using the boostrapSystem functions, initialising CEGUI is as simple as a single function call:

OpenGL (Fixed Function)

• Header: <CEGUI/RendererModules/OpenGL/GLRenderer.h>
• Library: CEGUIOpenGLRenderer-0

  // Bootstrap CEGUI::System with an OpenGLRenderer object that uses the
  // current GL viewport, the DefaultResourceProvider, and the default
  // ImageCodec.
  //
  // NB: Your OpenGL context must already be initialised when you call this; CEGUI
  // will not create the OpenGL context itself.
  CEGUI::OpenGLRenderer& myRenderer =
      CEGUI::OpenGLRenderer::bootstrapSystem();

OpenGL 3

• Header: <CEGUI/RendererModules/OpenGL/GL3Renderer.h>
• Library: CEGUIOpenGLRenderer-0

  // Bootstrap CEGUI::System with an OpenGL3Renderer object that uses the
  // current GL viewport, the DefaultResourceProvider, and the default
  // ImageCodec.
  //
  // NB: Your OpenGL context must already be initialised when you call this; CEGUI
  // will not create the OpenGL context itself.
  CEGUI::OpenGL3Renderer& myRenderer =
      CEGUI::OpenGL3Renderer::bootstrapSystem();

Direct3D

• Header: <CEGUI/RendererModules/Direct3D9/Renderer.h>
• Library: CEGUIDirect3D9Renderer-0

  // Bootstrap CEGUI::System with a Direct3D9Renderer object that uses the
  // DefaultResourceProvider, and the default ImageCodec.
  CEGUI::Direct3D9Renderer& myRenderer =
      CEGUI::Direct3D9Renderer::bootstrapSystem( myD3D9Device );

  Note

  This example shows the D3D9 renderer, but the D3D10 and D3D11 renderers are largely the same.

Ogre3D

• Header: <CEGUI/RendererModules/Ogre/Renderer.h>
• Library: CEGUIOgreRenderer-0

  // Bootstrap CEGUI::System with an OgreRenderer object that uses the
  // default Ogre rendering window as the default output surface, an Ogre based
  // ResourceProvider, and an Ogre based ImageCodec.
  CEGUI::OgreRenderer& myRenderer =
      CEGUI::OgreRenderer::bootstrapSystem();

Irrlicht

• Header: <CEGUI/RendererModules/Irrlicht/Renderer.h>
• Library: CEGUIIrrlichtRenderer-0

  // Bootstrap CEGUI::System with an IrrlichtRenderer object, an Irrlicht based
  // ResourceProvider, and an Irrlicht based ImageCodec.
  CEGUI::IrrlichtRenderer& myRenderer =
      CEGUI::IrrlichtRenderer::bootstrapSystem( myIrrlichtDevice );

The Hard Way: Manual object creation.

If for some reason you don't want to use the bootstrapSystem functions, you can still, of course, create all the required objects manually. The following describes the creation of the Renderer and System objects via separate calls. Note that if you have already used the boostrapSystem function, you do not need to perform the following steps, and can instead skip to Call the function to render the GUI

Create an instance of a CEGUI::Renderer based object

This is fairly straight forward and should pose no major obstacles for any of the supported renderers. You must of course remember to include the header file for the renderer that you will be using.

The basic renderer creation code is:

Direct3D 9

• Header: <CEGUI/RendererModules/Direct3D9/Renderer.h>
• Library: CEGUIDirect3D9Renderer-0

  CEGUI::Direct3D9Renderer& myRenderer =
      CEGUI::Direct3D9Renderer::create( myD3D9Device );

Direct3D 10

• Header: <CEGUI/RendererModules/Direct3D10/Renderer.h>
• Library: CEGUIDirect3D10Renderer-0

  CEGUI::Direct3D10Renderer& myRenderer =
      CEGUI::Direct3D10Renderer::create( myD3D10Device );

OpenGL (Fixed Function)

• Header: <CEGUI/RendererModules/OpenGL/GLRenderer.h>
• Library: CEGUIOpenGLRenderer-0

  // Create an OpenGLRenderer object that uses the current GL viewport as
  // the default output surface.
  CEGUI::OpenGLRenderer& myRenderer =
      CEGUI::OpenGLRenderer::create();

OpenGL 3

• Header: <CEGUI/RendererModules/OpenGL/GL3Renderer.h>
• Library: CEGUIOpenGL3Renderer-0

  // Create an OpenGL3Renderer object that uses the current GL viewport as
  // the default output surface.
  CEGUI::OpenGL3Renderer& myRenderer =
      CEGUI::OpenGL3Renderer::create();

Ogre3D

• Header: <CEGUI/RendererModules/Ogre/Renderer.h>
• Library: CEGUIOgreRenderer-0

  // Create an OgreRenderer object that uses the default Ogre rendering
  // window as the default output surface.
  CEGUI::OgreRenderer& myRenderer =
      CEGUI::OgreRenderer::create();

Irrlicht Engine

• Header: <CEGUI/RendererModules/Irrlicht/Renderer.h>
• Library: CEGUIIrrlichtRenderer-0

  CEGUI::IrrlichtRenderer& myRenderer =
      CEGUI::IrrlichtRenderer::create( myIrrlichtDevice );

Create the CEGUI::System object to initialise the system

Another extremely simple step. Just instantiate the CEGUI::System object by using the System::create function, passing in the reference to the CEGUI::Renderer that you created in the previous step. This will cause the core CEGUI system to initialise itself.

CEGUI::System::create( myRenderer );

Call the function to render the GUI

This is the only step that, depending upon your target engine, can be done differently. Basically what you need to do call the CEGUI::System::renderAllGUIContexts function at the end of your rendering loop. For users of the Ogre3D engine, this step is taken care of automatically. For everybody else, some simple example code can be seen below:

Direct3D 9

// Start the scene
myD3DDevice->BeginScene();
// clear display
myD3DDevice->Clear(0, 0, D3DCLEAR_TARGET, D3DCOLOR_XRGB(0, 0, 0), 1.0f, 0);
// user function to draw 3D scene
draw3DScene();

    // draw GUI
    CEGUI::System::getSingleton().renderAllGUIContexts();

// end the scene
myD3DDevice->EndScene();
// finally present the frame.
myD3DDevice->Present(0, 0, 0, 0);

Direct3D 10

// define colour view will be cleared to
float clear_colour[4] = { 0.0f, 0.0f, 0.0f, 1.0f };

// clear display
myD3DDevice->ClearRenderTargetView(myRenderTargetView, clear_colour);

// user function to draw 3D scene
draw3DScene();

    // draw GUI
    CEGUI::System::getSingleton().renderAllGUIContexts();

// present the newly drawn frame.
mySwapChain->Present(0, 0);

OpenGL

// user function to draw 3D scene
draw3DScene();

// make sure that before calling renderAllGUIContexts, that any bound textures
// and shaders used to render the scene above are disabled using
// glBindTexture(0) and glUseProgram(0) respectively also set
// glActiveTexture(GL_TEXTURE_0) 

    // draw GUI
    // NB: When not using >=3.2 core profile, this call should not occur
    // between glBegin/glEnd calls.
    CEGUI::System::getSingleton().renderAllGUIContexts();

Irrlicht

// start the scene
myIrrlichtDriver->beginScene(true, true, irr::video::SColor(150,50,50,50));
// draw main scene
myIrrlichtSceneManager->drawAll();

    // draw gui
    CEGUI::System::getSingleton().renderAllGUIContexts();

// end the scene
myIrrlichtDriver->endScene();

Conclusion

This is the most basic introduction to setting up CEGUI to render. There are things not covered here, such as using different rendering targets in Ogre and advanced options such as user specified resource providers, and so on.